


|
Rugged Ridge
Heavy Duty Steering Box Mount
1976-86 CJ Powder Coated
Part# 18003.10
$90.00 |
|
PCS |
Rugged Ridge
Steering Box Brace
1976-86 CJ
Part# MS-9037
$60.00 |
 |
M.O.R.E. Steering Box Mount HD
SB7686 (1976-1986 CJ Raw Steel)
$130.00
SB7686Z (1976-1986 CJ Zinc Plated)
$140.00
SB7686-1 ( 1976-1986 CJ Raw Steel 1" Forward)
$130.00
SB7686-1Z ( 1976-1986 CJ Zinc Plated 1" Forward)
$140.00 |
 |
M.O.R.E. Steering Box Braces
SB9037 (1976-1986 CJ) $75.00
SB9037W (1987-1995 YJ) $75.00
SB9037TJ (1997-2002 TJ) $75.00
SB9037XJ (1984-2001 XJ) $75.00 |
 |
M.O.R.E. SB9037C (Clamp Only)
$25.00
|
|
 |
Saginaw Power
Steering Adapter Kit
with or without
frame plates
Adapter only $75.00
Adapter w/Plates $100.00 |
 |
Turn Signal Switch 76-96 CJ, and YJ
fits standard or
tilt column
Part# 56002011
$40.00 each |
 |
Steering Column Lower Bearing Kit
Part # 4487696k 76-86 CJ
$20.00 each |
 |
Steering Column to Firewall Seal
Part# 3196896
76-86 CJ
$8.00 each |
 |
76 - 86 Power
Steering Coupler
$28.00 each |
 |
76
- 86 Power Steering Couple with Hardware
$42.00 each |
 |
Dana 60 King Pin High Steer
Arms
THESE ARE MACHINED FROM A SOLID BLOCK
THEY ARE
DESIGNED FOR USE WITH CONICAL NUTS AND SPECIAL STUDS SOLD SEPARATELY.
THESE ARE AVAILABLE IN LEFT OR RIGHT WITH SINGLE OR DOUBLE HOLE FOR 1 TON
ENDS
$145.00 PER ARM |
 |
Dana 44 High Steer Arms
These are fully milled
without any flame cutting these are designed to use 1 ton tie rod ends.
$175.00 set |
 |
High Steer Studs,
Conical Cones and Lock Nuts
$70.00 set of 6
or
$35.00 set of
3 |
 |
Dana
30 Dana 44 High Steer Knuckles
left and right milled and
drilled
depending on availability on
knuckles
$225.00 set |
 |
Dana
30 Dana 44 High Steer Kits
left and right milled and
drilled with studs and hardware including high steer arms
depending on availability on
knuckles
$435.00 set |
 |
Moog 1 ton Tie Rod Ends Left
or Right 7/8" thread
$50.00 each |
 |
45 - 71 CJ
Left
Thread Tie Rod End with Hole
$24.00 each |
 |
Replacement
Tie
Rod Ends for
CJ's and Jeepster's
11/16" thread
left or right thread
Part # 920535 -
921317
$15.00 each |
 |
Replacement
Tie
Rod Ends 50-71
m38 and m38a1
great for upgrades
for custom tie rods
3/4" thread
left or right thread
Part # 809190 -
809191
$15.00 each |
 |
Jeepster Tie Rod End with Hole
67-71 ( Part # 920536)
$24.00 each |
 |
Jeepster Tie Rod End Kit
67-71 ( Part # JGW1104)
Includes:
1 -# 920536
1 - #92035 2 - #9211317
$65.00 each |
 |
Tie Rod Lock
Nuts Left or Right
11/16 , 3/4
or 7/8
$5.00 each |
 |
Drop Pitman Arms
for 1987-1995
Wrangler YJ with 3.75" drop
$35.00 each |
 |
Drop Pitman Arms
for Jeepster's and
CJ's with 3.75" drop
$40.00 each |
 |
Stock
Replacement Pitman Arms for manual or
power steering
$25.00 each |
 |
Stock
Replacement Pitman Arms
Jeep TJ with
power steering
$35.00 each |
 |
Stock
Replacement Pitman Arms
Jeep Cherokee XJ with
power steering
$35.00 each |
 |
OTC
Heavy Duty Ball Joint Spanner Socket
$26.00 each |
 |
Dana Spicer
Brand Replacement Ball Joints for
early Dana 30 and Dana 44 front
$50.00 set
(2 sets required) |
 |
Late
Model Dana
30 Ball Joints (85 - up except CJ)
$50.00 set |
 |
Bell Crank Rebuild Kit
1967 - 1969 Jeepster
JO991381
$45.00 each |
 |
Bell Crank Rebuild Kit
1949 - 1971 CJ with
4 cyl 7/8"
920556
$25.00 each |
 |
Bell Crank Rebuild Kit
1941 - 1949 MB, CJ
before serial # 199079
915762
$25.00 each |
 |
Rebuild
Kit for
45 - 71 CJ and Jeepster Hardware Kit for Drag Link
Part #923418
$15.00 set |
 |
Axle Nut Socket
For all CJ's
Part# A-692
$10.00 each |
|
|
|